Tips for cleaning glasses

For those of you who wear glasses every day, how can you clean the lenses to make them look shiny? ! The following are tips for cleaning lenses for you, please check them out!

1. Core principles of cleaning

Alcohol is prohibited: it dissolves the lens coating (anti-blue light/anti-radiation coating), causing permanent damage.

Avoid dry wiping: dust particles will scratch the surface of the lens, so rinse it before processing.

Gentle operation: wiping hard will damage the coating structure and affect the optical performance.

1. Standard cleaning steps (wet cleaning is recommended) Pre-rinsing
2. Rinse the front and back of the lens with cold water for 10 seconds to wash away the dust on the surface (warm water may cause the coating to crack) Apply detergent
3. Put 1 drop of dish washing liquid/special neutral detergent on your fingertips, make foam and apply it to the lens

* Taboo: soap (alkaline corrosive coating), toothpaste (containing abrasives) Gently rub

* Rub the lens in a spiral shape with your fingertips for 20 seconds (avoid the frame screws)

1. Rinse thoroughly

* Adjust the water flow to a thin line, and rinse the lens horizontally until there is no greasy feeling (residual detergent will blur the vision)

1. Absorb moisture

* Use a microfiber cloth to gently press in one direction to absorb water (no back and forth rubbing)

* Alternative solution: shake off the water droplets and let it air dry naturally.

3. Emergency alternatives

①Special spray: Spray on the lens and wipe it with a lens cloth in one direction (choose an alcohol-free formula)

②Sonic cleaning: Deep cleaning at the optical shop once a month (remove dirt from gaps)

③Wet wipes: Choose alcohol-free single-piece packaging to avoid repeated use

! ! ‌Operation is strictly prohibited! ! ‌

①Dry wipe with the corner of clothes/paper towel → 99% of scratches are the source

②Rinse with hot water → High temperature accelerates coating peeling

③Alcohol disinfection → Irreversible after the coating dissolves

④Soap cleaning → Alkaline residue corrodes the lens

4.Coating Protection Tips: Apply a small amount of hydrophobic coating care solution (such as automotive glass coating agent) when using new glasses to reduce oil adhesion and extend the life of the coating. When the lens has mesh scratches or the light transmittance decreases, the lens needs to be replaced immediately.

The above are the various methods and steps for cleaning lenses that we have sorted out for you~ In order to extend the service life of glasses, please take good care of our glasses. After all, they will accompany us to see this wonderful world together!!!